DIY Projects using WizFi250 or WizFi210
This posting introduces DIY projects using WIZnet’s Wi-Fi modules WizFi250 and WizFi210.
To Make Canon DSLR’s Remote controller using WizFi250
This project explains how to make a Wi-Fi Remote Controller that controls a Canon Camera.
You need the following components of the device.
- Connect the Receiver and 2.5pi Audio Cable
- Arduino Uno(MCU)+WizFi250 (Wi-Fi Module)
- Use AP function of WizFi250 (directly connect to smartphone without wire/wireless router)
- Remote Controller
- Smart Phone
- Simple Android App
Author’s Blog(KOR) : http://kaizen8501.tistory.com/86
WiFi Electric Skateboard using WIZwiki-W7500ECO + WizFi250
This project explains how to make an electric skateboard using the WIZwiki-W7500ECO MCU board and the WizFi250 Wi-Fi Module.
The required components are as follows.
If you would like to purchase any, please click the name.
- Motor Mount
- 44T Drive Wheel Pulley Adapter
- 12S 120A ESC
- TorgqueBoards ESC Programming Card
- 12S UBEC
- On/Off Anti-Spark Power Switch
Author’s Blog(KOR) :
Author’s Blog(ENG) :
Hedgehog – Educational Robotics Controller
Hedgehog is a project for those who want to study and research using Robot. This project was posted on KickStarter in 2015, but failed at funding. However, I think this is a good example for learning the operation principle of embedded device and robotics. For reference, Hedgehog used the WizFi210 Wi-Fi Module for Wi-Fi communication.
For more details, please refer to the following links.
Drainage tank of water purifier IoT
Curator : Patrick in WIZnet
You can contact to email@example.com